Volcano Classic Replacement Switch RED SR-06NR-R

$9.99

SR-06NR-R RED Fits Volcano Classic

In stock

Continue Shopping
Brands:

Description

Red Replacement Rocker Switch fits Volcano Classic

Red Replacement rocker switch fits Volcano Classic.

    • Note, Replacement switch top will have on off markings as pictured
    • Model SR-06NR-R-110V Illuminated rocker switch. OEM SR-06NR model switch as supplied in your unit.
    • 16 A 125 VAC, 8 A 250 VAC
    • ON – OFF 3 pins – Light 110 VOLTS
    • Fits Volcano Classic –ย this Switch is suitable for Heat or Air replacement locations.ย  Also Found in some Bissell 37603 Vacuums
    • Warranty is good for 30 days after your receipt. Please contact us if you need a replacement with in the 30 days.

Replacement Rocker Switch for your Volcano Classic. Illuminated rocker switch 16 A 125 VAC Easy Replacement at home no need to ship off your Volcano, Simply pop out your broken switch, pop in your new switch and plug in the 3 wires. You will be up and running in minutes.

Note, this item is not authorized for resale without our prior written consent. ย Please beware of imposters selling our wares,ย  buy your Volcano replacement switch from DepotEco.

All products are intended for use with legal, nonโ€‘tobacco materials only.

See below for installation.

Volcano Switch Replacement (Classic and Digit)

You will need a Torx screwdriver tool to remove the case screws. Older Volcano units shipped with T8 Torx Screws and then began shipping with T8 Security Torx screws. Newer units also now ship with a T10 Security Torx screw.

(Please verify your screw types T8 or T10)

Keep your Volcano running smoothly with this high-quality replacement part. Designed for easy installation and long-lasting performance, it ensures your device stays in top working order. All products are intended for use with legal, nonโ€‘tobacco materials only.

CSA Standards

Certified to CAN / CSA C22.2 No. 55:

This is the switch standard for Canada designed to go into other low voltage (below 600V) appliances. This receive the โ€œCSA Markโ€ or if combined with a USA approval, the โ€œcCSAus Markโ€.

Certified to ANSI / UL 1054:
This is the switch standard for the USA for UL recognized component switches designed for low voltage (below 600V) appliances.ย  This will get the โ€œCSAus markโ€ or if combined with a Canada approval, the โ€œcCSAus Markโ€.

Additional Information

Weight 0.13 lbs

9 reviews for Volcano Classic Replacement Switch RED SR-06NR-R

5.0 out of 5 stars (based on 9 reviews)
Excellent100%
Very good0%
Average0%
Poor0%
Terrible0%

 

November 11, 2021

Ordered replacements for switches on my Volcano Classic. Original parts and really fast shipping (fast delivery too). Thanks for such a great service.

JD
Verified
July 22, 2020

My volcano classic has been going strong for 6-7 years until the power button gave out recently. I was skeptical about this replacement, but itโ€™s worth a shot before buying a new one for $500.

It works perfectly! Video was even very helpful to install, the whole process took about 10 minutes before I was back up and running.

Reviewed by jsbach64

jsbach64
December 11, 2019

Do or do not. There is no try.

Fits perfect! The video also helps make the whole process simple, easy and affordable

Hannahrene7
November 6, 2017

It works and fits the stock housing, same fit as OEM

Hunter A
Verified
December 30, 2016

The old switch was a bear to remove (not surprising), but this replacement popped right in and I was able to connect it with no problems.

Renee Hoffmanon
Verified

Only logged in customers who have purchased this product may leave a review.

You may also like…